Honor Magic 8 Lite 5G (MTN-NX3 / MTN-LX3) UFS Dump File | Dead Boot Repair / Unbrick

Device Specifications & Firmware Details:

• Device Model: Honor Magic 8 Lite 5G (MTN-NX3 / MTN-LX3 / MTN-AN00)

• Chipset / Platform: Qualcomm Snapdragon 6 Gen 1 / Snapdragon 6s Platform

• Storage Interface: UFS (Universal Flash Storage)

• Operating System: MagicOS (Android 15 / Android 16)

• File Status: 100% Tested & Verified on Working Hardware

Overview & File Description

This package provides a complete raw storage dump and bootloader partition backup extracted from a fully functional Honor Magic 8 Lite 5G (MTN-NX3). It is designed to revive hard-bricked devices, repair corrupted boot sectors, or write factory partition configurations onto replacement memory ICs via hardware programmers.

Included Partitions & Contents:

• Full LUN layout: LUN0, LUN1, LUN2, LUN3, LUN4, LUN5

• Core Qualcomm boot stages: xbl, xbl_config, abl, tz, hyp, boot, dtbo, vbmeta, etc.

• Factory GPT partition map & XML programming scripts (rawprogram0.xml, patch0.xml)

Compatible Hardware Programmer Tools:

• EasyJTAG Plus (UFS Socket / ISP Mode)

• Medusa Pro II

• MiPi Tester Box

• UFI-UFS ToolBox / JC Programmer

Key Applications & Use Cases:

1. Dead Boot Repair: Recover devices showing no response, drawing low standby current (0.02A–0.08A), or stuck in Qualcomm Emergency Download Mode (EDL 9008).

2. Hard Brick Fix: Repair partition table corruptions caused by interrupted OTA updates, cross-flashing wrong regional firmware, or damaged bootloaders.

3. Storage IC Replacement: Program directly to fresh UFS memory chips after hardware replacement, reballing, or repartitioning.

Important Warning:

Before erasing the chip or flashing the full dump, always dump and back up the unique network and calibration partitions (modemst1, modemst2, fsg, fsc, persist) to preserve the device's original IMEI, Baseband calibrations, and factory serial numbers.