Oppo N1 Mini 5117 QCN File

Oppo N1 Mini 5117 QCN File – Network Calibration & Baseband Fix

Flashing the QCN file on the Oppo N1 Mini (N5117) restores corrupted NVRAM configuration, resolves "No Service" / "Searching for Signal" errors, and fixes invalid, missing, or null IMEI and baseband parameters.

File Information

• Device Model: Oppo N1 Mini / N5117

• Chipset: Qualcomm Snapdragon 400 (MSM8928)

• Function: RF NVRAM repair, Baseband restoration, Cellular network fix

• Download Link: Oppo N1 Mini 5117 QCN File

Requirements

• Windows PC with installed Qualcomm HS-USB / Diag Drivers.

• QPST Tool (Qualcomm Product Support Tool).

• Target handset with USB Debugging enabled.

Restoration Steps

1. Enable Diag Port: Connect your device to the PC and switch on Diagnostic mode (dial *#801# / *#9434# or execute adb shell setprop sys.usb.config diag,adb via root shell).

2. Verify COM Connection: Open QPST Configuration and ensure the active Qualcomm Diagnostics COM port is recognized under Active Phones.

3. Open Restore Tool: Navigate to Start Clients > Software Download, then switch to the Restore tab.

4. Load QCN File: Click Browse next to the QCN File field and load your downloaded Oppo N1 Mini 5117 QCN File.

5. Flash Network Data: Check the box for Allow phone / file ESN mismatch, click Start, and wait for the restore process to reach 100%.

6. Reboot: Disconnect the USB cable and restart your phone.