Oppo R5 R8107 QCN File

Oppo R5 R8107 QCN File – Network Calibration & Baseband Fix

Flashing the QCN file on the Oppo R5 R8107 restores corrupted NV data, repairs "Unknown Baseband" status, and fixes "No Service" or null/invalid IMEI issues on Qualcomm-based architecture.

File Information

• Device Model: Oppo R5 / R8107

• Chipset: Qualcomm Snapdragon 615 (MSM8939)

• Function: RF NVRAM repair, Baseband restoration, Network signal fix

• Download Link: Oppo R5 R8107 QCN File

Requirements

• Windows PC with Qualcomm USB Drivers installed.

• QPST Suite (Qualcomm Product Support Tool).

• Device with USB Debugging activated.

Restoration Steps

1. Enable Diag Port: Connect your device to the PC and switch on the Diagnostic interface (via secret code *#801# / *#9434# or root ADB shell command setprop sys.usb.config diag,adb).

2. Confirm Connection: Launch QPST Configuration and verify the active Qualcomm Diagnostics COM port under the Active Phones section.

3. Open Restore Client: Navigate to Start Clients > Software Download, then switch to the Restore tab.

4. Load QCN File: Click Browse next to the QCN File field and load your downloaded Oppo R5 R8107 QCN File.

5. Flash Network Data: Check Allow phone / file ESN mismatch, hit Start, and wait for the status to show complete.

6. Reboot: Disconnect the USB cable and restart your phone.