🔥 Welcome to Mpyunlock Forum! Follow us for the latest files and software.        📢 Don't forget to check the Announcements page!        ⚡ New files are added every day.
0
Your Cart: 0.00USD

  • Shopping cart is empty !

Oppo Mirror 3 R3007 QCN File [ 2026-08-26 13:04:35 ]
Oppo N1 Mini 5117 QCN File [ 2026-08-26 13:03:14 ]
Oppo N3 N5207 QCN File [ 2026-08-26 13:01:53 ]
Oppo R1C R8205 QCN File [ 2026-08-26 13:00:14 ]
Oppo R1C R8207 QCN File [ 2026-08-26 12:58:02 ]
Oppo R3 R7007 QCN File [ 2026-08-26 12:56:15 ]
Oppo R5 R8107 QCN File [ 2026-08-26 12:53:34 ]
Oppo R831S QCN File [ 2026-08-26 12:51:52 ]
OPPO Reno10 5G (CPH2531) Dump File FEATURED [ 2026-08-26 12:51:15 ]
Oppo R1107S QCN [ 2026-08-26 12:48:43 ]
XİAOMİ ALL MİUİ 14 FRP BYPASS [ 44 Downloads ]
A145F U4 WARNİNG LOGO FİX [ 40 Downloads ]
Xiaomi Redmi8A Reset EFS Bootloader Locked or Unlocked Mpyunlock.com.rar [ 35 Downloads ]
Redmi 10C (fog) Reset_EFS MIUI 14 Mpyunlock.com.rar [ 33 Downloads ]
Redmi note 8 Fix reset efs At Flashing eng rom Mpyunlock.com.rar [ 33 Downloads ]
Redmi Note 11 spesn Reset_EFS Mpyunlock.com.rar [ 32 Downloads ]
xiaomi-mi-10-edl-point [ 28 Downloads ]
Redmi+Note+12R+Pro+5G+(Sunstone)+Reset+EFS+Flash+In+EDL+Mode Mpyunlock.com.rar [ 28 Downloads ]
xiaomi-mi-11-lite-4g-edl-point [ 27 Downloads ]
Redmi Note 12 Pro 4G (sweet_k6a) Test Point [ 23 Downloads ]
CPH2531 Go Back

OPPO Reno10 5G (CPH2531) Dump File

New Featured

RENO 10 5G ANDROID 15 BY SADEWO PCB

Date 2026-08-26 12:51:15
Filesize 9.00 GB
Visits 40
Downloads 1
Download

OPPO Reno10 5G (CPH2531) Dump File Guide | Tested & Verified by SADEWO PCB

A complete technical overview and flashing guide for the OPPO Reno10 5G (CPH2531) full dump file, specially prepared and verified by SADEWO PCB.

What is an OPPO Reno10 5G (CPH2531) Dump File?

An eMMC / UFS Dump File is a bit-by-bit binary backup extracted directly from a fully working device's storage. It contains all crucial partitions, including bootloaders, system configurations, and partition tables.

Key Uses:

  • Dead Boot Repair: Revives hard-bricked devices showing no display or stuck in deep BROM/EDL mode.

  • Auto Port Fix: Resolves infinite MTK/VCOM port loops caused by corrupted partition tables (GPT).

  • Storage Replacement: Essential for programming new UFS memory chips during chip-off hardware repairs.

  • Baseband & Security Prep: Restores base firmware structure so security partitions (NVRAM, NVDATA) can function properly.

Technical Specifications

Parameter Specification
Model OPPO Reno10 5G (CPH2531)
Processor MediaTek Dimensity 7050 (MT6877V)
Memory Type UFS 2.2
Tested By SADEWO PCB
Supported Tools EasyJTAG Plus, UFI Box / UFI UFS Prog, MiTester, Medusa Pro II

Step-by-Step Flashing Guide

1.Direct ISP / UFS Socket Connection:Hardware connection required for dead boot.

Disassemble the device and connect the UFS memory chip via direct ISP pinout (VCC, VCCQ, CLK, CMD, D0) or desolder the UFS chip and place it into a dedicated UFS socket adapter.

2.Initialize Storage in Programmer Tool:

Launch your hardware tool interface (EasyJTAG Plus, UFI UFS Tool, or Medusa Pro II). Power on the socket/ISP and click Check / Identify to verify valid chip detection and partition integrity.

3.Write Dump Partitions:

Select and write the dump files provided by SADEWO PCB:

  • LUN0 / Userarea: Main system data and partition tables.

  • LUN1 / Boot1 & LUN2 / Boot2: Bootloader configuration blocks.

  • RPMB: (If applicable/unlocked).

4.Reassemble & Flash Stock Firmware:

Resolder the UFS chip (if desoldered), assemble the board, and boot the device into MTK Download / Fastboot mode. Flash the latest official OFP stock firmware using an authorized tool or Pandora/UnlockTool to finalize system calibration.

Review This!

Only users can review this file after download

Admin WhatsApp Sadewo Pcb WhatsApp Facebook Facebook Telegram Telegram